Konica Minolta bizhub 361 User Manual page 66

Before Making Copies
1.5 Loading paper into tray 3
0
Tray 3 referred here is the tray of optional Paper feed cabinet PC-407.
0
If the sub power switch is turned off, even while the main power switch is on, the tray 3 cannot be pulled
out, even after the tray release button is pressed. Be sure that the machine is turned on with the sub
power switch.
1
Press the tray release button.
The tray 3 will be unlocked and slide out slightly to the
front.
2
Pull out the tray 3.
3
Load the paper into the right side of the tray 3 so that the side of the paper to be printed on (the side
facing up when the package was unwrapped) faces up.
– To print on OHP transparencies, thick paper, thin
paper, tracing paper or envelopes, use the bypass
tray.
501/421/361
1
1-46