Konica Minolta bizhub 361 User Manual page 64

Before Making Copies
3
Load the paper into the tray so that the side of the paper to be printed on (the side facing up when the
package was unwrapped) faces up.
– Load letterhead paper so that the side to be printed
on faces down.
– If letterhead paper is loaded as shown below to make a single-sided copy, the document image is
printed on the side that was previously printed on. The paper will be fed out facing down.
? How is curled paper loaded?
% Flatten the paper before loading it.
? How many sheets of paper and other media can be loaded?
% Do not load so many sheets of plain paper that the top of the stack is higher than the , mark.
501/421/361
D C B A
A
ABCD
A
ABCD
A
1
1-44