To Empty The Punch Scrap Box Of Fs-523 - Konica Minolta bizhub 361 User Manual

Replacing toner cartridges and staple cartridges and emptying punch scrap box
<Display in Enlarge Display mode>
8.3.1

To empty the punch scrap box of FS-523

0
Even when the punch scrap box is full, the message is not displayed. Before using punch mode,
perform the following procedure to check if the punch scrap box, if needed.
0
The punch scrap box is not disposable. Be sure to return it to its original position.
1
Slide the finisher to the left.
– Holding the finisher handle on the top, slide the
finisher to the left until it stops.
2
Open the finisher right door FN7.
3
Pull out the punch scrap box.
501/421/361
8
8-18