Konica Minolta bizhub 361 User Manual page 430

Utility mode
12
To use the account track function, touch [Account Name].
– [Account Name] appears only if "Account Track" on the General Settings screen been set to "ON".
The Account Name screen appears.
13
Touch the button for the desired account, and then touch [OK].
– Before an account name can be selected, accounts must have been registered.
For details on registering accounts, refer to
The account is set.
14
Touch [Max. Allowance Set].
The Max. Allowance Set screen appears.
15
To specify the maximum number of prints allowed, use the keypad to type in the desired value.
– To specify no maximum for prints, touch [No Limit].
16
Touch [OK].
The maximum number of prints allowed is set.
17
To use authentication unit (biometric type) or authentication unit (IC card type), touch [Register Auth.
Info.].
– [Register Auth. Info.] appears only if an authentication unit is installed on this machine.
– For details on using the authentication unit, refer to the User's Guide for the authentication unit.
The Register Auth. Info. screen appears.
18
Touch [Edit].
– When using authentication unit (biometric type), place a finger on the authentication unit and
register the vein patterns.
– When using authentication unit (IC card type), place an IC card on the authentication unit and
register the card information.
19
Touch [Function Permission].
The Function Permission screen appears.
20
Touch the button for the desired setting for each operation.
– To permit the operation to be performed, touch [Allow].
501/421/361
"Account Track Registration" on page
11
11-62.
11-58