Konica Minolta bizhub 361 User Manual page 307

Application functions
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key
to erase the value, and then specify the correct value.
? What are the limits on the adjustment amount?
% The print position can be finely adjusted in 1/16 inch increments.
? Can no adjustments be made?
% To make no left/right or up/down adjustments, touch [No Adjustment].
8
Select the desired settings for "Text Size".
– As the factory default, the following setting is selected.
Text Size: Std.
9
Touch [OK], and then touch [Close] in the next screen that appears.
10
Specify any other desired copy settings.
11
Using the keypad, type in the desired number of copies.
12
Press the [Start] key.
501/421/361
7
7-58