Network Settings; Copier Setting - Konica Minolta bizhub 361 User Manual

Utility mode
11.4.5

Network Settings

Parameter
Network Setting
TCP/IP Settings
NetWare Settings
HTTP Server Settings
FTP Settings
SMB Settings
LDAP Settings
E-mail Settings
SNMP Settings
AppleTalk Settings
Bonjour Setting
TCP Socket Settings
WebDAV Settings
Web Service Settings
BMLinkS Settings
SSDP Settings
Detail Settings
IEEE802.1X Authentication Set-
tings
Network Fax Settings
11.4.6

Copier Setting

Parameter
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Print Jobs During Copy
Operation
501/421/361
Description
Specify settings for using the network. For details, refer to the User's Guide
[Network Scan/Fax/Network Fax Operations].
Specify settings for using network faxing. For details, refer to the User's Guide
[Network Scan/Fax/Network Fax Operations].
Description
Select whether or not the "Auto" Zoom setting is automatical-
ly selected when a paper tray is selected (except when the
"Auto" Paper setting is selected) while an original is placed on
the original glass.
Select whether or not the "Auto" Zoom setting is automatical-
ly selected when a paper tray is selected (except when the
"Auto" Paper setting is selected) while an original is loaded
into the ADF.
Select which paper tray is selected when the "Auto" Paper
setting is canceled.
• Tray Before APS ON:
The paper tray that was being used before the "Auto" Pa-
per setting was selected is selected.
• Default Tray:
Tray 1 is used.
Select the default paper tray loaded with paper for the cover
pages (front cover), inserted pages and chapter title pages.
Select whether or not print data or fax data can be accepted
for printing while a copy operation is being performed.
• Accept:
Print data and fax data can be accepted and printed.
• Receive Only:
Print data and fax data is printed after the copy operation
is finished.
11
Default Setting
OFF
ON
Tray Before APS ON
Tray 2
Accept
11-31