Clearing A Paper Misfeed In Finisher Fs-517 - Konica Minolta bizhub C451 Copy Operations

6

Clearing a paper misfeed in Finisher FS-517

This procedure describes the operations to be performed along the paper path where paper misfeeds may
occur.
Depending on the selected Finishing settings, the paper path changes, resulting in different locations in the
finisher where paper misfeeds may occur.
1
Open the cover for the horizontal transport unit, and then
remove any misfed paper in the horizontal transport unit.
– Do not forcefully push or pull the sensor pin in the
horizontal transport unit, otherwise the horizontal transport
unit may be damaged.
2
Open the machine's front door.
3
Lower guide lever FN2, and then remove any paper.
4
Return guide lever FN2 to its original position.
6-44
Troubleshooting
Sensor pin
bizhub C451/C550/C650