Konica Minolta bizhub 361 User Manual page 481

Authentication Unit (IC Card Type AU-201)
4
Touch [Edit].
5
Position the IC card on this device, and then touch [OK].
6
After the message "Registered" appears, touch [Close], and then touch [Close] in the next screen that
appears.
7
Type the user name and the password.
8
If desired, specify the function limitations.
9
Touch [OK].
10
Touch [Close].
Registering from Data Administrator
In order to use Data Administrator, settings must be specified on the multifunctional product and the setup
procedure must be performed. The setup procedure includes installing this device's IC Card Driver (USB-
Driver), then installing Data Administrator IC Card Plugin.
Reminder
Data Administrator ver. 3.0 or later must first be installed on the computer. For details on the operating
environment and installation procedure for Data Administrator, refer to the User's Guide for the Data
Administrator..
Setup
1
Turn off the multifunctional product with the main power switch, and then disconnect this device from
the multifunctional product.
2
Install IC Card Driver (USB-Driver).
501/421/361
13
13-9