Product Features; Device Description; Part Names And Their Functions - Konica Minolta bizhub 361 User Manual

Authentication Unit (Biometric Type AU-101)
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
WARNING: The design and production of this unit conform to FCC regulations, and any changes or
modifications must be registered with the FCC and are subject to FCC control. Any changes made by the
purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (For Canada Users)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
12.2

Product features

This device is a biometric authentication system that performs user authentication by scanning vein patterns
in a finger. Print job operation can be authenticated with finger vein patterns when using multifunctional
products with user authentication settings specified.
12.3

Device description

12.3.1

Part names and their functions

No. Name
1 Status indicator
2 Security slot
3 USB port (type mini-B)
The status of this device is indicated by a status indicator and tone.
Status indicator
Lit (green)
Flashing (green)
Lit (red)
Off
Tone
One short beep
One short beep
One short beep
Two short beeps
501/421/361
Top view
Description
Indicates this device's status.
Used for connecting the security cable to prevent thefts. (complies with the se-
curity cable standards of the Kensington Computer Products Group)
Used to connect a USB cable (mini-B plug).
Device status
Standing by/authentication completed
Authenticating/scanning
Authentication failed/scanning failed
This device is not detected.
Device status
Starting to scan
Retrying after authentication failed
Authentication completed
Authentication failed
2 3
1
Rear view
12
12-3