Commodore Amiga A500 Technical Reference Manual page 61

Section
3.3
Software for Amiga Expansion
This section contains listings and information on the following
expansion software commands:
EXPANSION.LIBRARY1
NAME
ADDDOSNODE
AddDosNode
-
mount a disk to the system
SYNOPSIS
ok
=
AddDosNode( bootPri, flags, deviceNode
)
DO DO
D1
A 0
FUNCTION
This routine makes sure that your disk device (or a device that wants
to be treated as if it was a disk
...)
will be entered into the system.
If
the dos is already up and running, then it will be entered immediate-
ly. If the dos has not yet been run then the data will be recorded, and
the dos will get it later.