Commodore Amiga A500 Technical Reference Manual page 57

Section 3.2
Driver documentation
This section discusses how the "binddrivers" program finds your
driver and links it into the system. It also hints on how to write your
code to take advantage of this.
First off, the expansion library goes out and configures the expan-
sion boards in the system. It puts each board in its own address
space, and links memory boards into the memory free pool. This is
done by the expansion.librarySs Configchain entry point. This code is
intended to be run early on in system startup, before any other code
is around.
Later on, after the DOS is running, the binddrivers program should
be run. This program searches the directory "SYS:Expansion" for
workbench icon files. If it finds one with a tooltypes variable "PROD-
UCT" then it parses the rest of the line (see below) and looks for an
unconfigured board that matches the description.
This method makes user installation of a new driver trivial: the user
only has to copy a workbench icon into the expansion directory on
his sys disk. Everything else is automatic the next time he boots.
In addition, the bootdrivers program may be run repeatedly without
ill
effect. Devices will not be configured twice, so binddrivers may be
run after a new driver is installed (so the user does not have to re-
boot after installing a driver).
OVERVIEW
Here is an overview of the process:
search:
for each file that ends in .info, do test
( ).
test:
1 .
Call GetDiskObject(
)
on this file. If not a workbench object, re-
turn.
2. Call FindToolType
( )
to see if there is a PRODUCT definition. If
not, return.
3. If the description does not match an unconfigured board, return.
If there are boards, link them all together and rkcord them in a
static area.
4.
LoadSeg
( )
the code file. If LoadSeg fails, return.
5. Search the first hunk for a Resident structure. If no structure.
UnLoadSeg
( )
the segment and return.