Commodore Amiga A500 Technical Reference Manual page 141

INCLUDE FILES
LISTINGS
janus.[hi]:
gives interface t o janus.library. All definitions in this file are
amiga specific. The most useful thing in this file are the
definitions for janus memory allocation types
janusreg.[hi]:
hardware constants. Most people should not need this. If you
do, we need t o hide more information.
janusvar.[hi]:
the shared data structure between the amiga and the pc. Once
again, you should not need direct access t o these routines. We
have tried t o provide interface routines t o do all the normal
things.
i86block.i:
command blocks for calling pc's interrupt's directly and for the
hard disk.
sewices.[hi]:
hard coded constants for interrupt numbers. Eventually these
numbers will be gotten a t run time, but for now they are
constants. These numbers correspond t o the "jintnum"
parameters below.
setupsig.[hi]:
data structure for SetupJanusSig(
)
call.
i86block.i
-
interface definitions between amiga and
commodore-pc
Copyright
O
1986, Commodore-Amiga Inc., All rights reserved
IFND JANUS-186BLOCKI
JANUS-186BLOCKI SET 1
;
All registers in this section are arranged t o be read and written
;
from the WordAccessOfTset area of the shared memory. If you really
;
need t o use the ByteAccessArea, all the words will need t o be byte
;
swapped.