Bandwidth Control - peplink ONE 20 User Manual
Balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for ONE 20:
- User manual (258 pages) ,
- User manual (207 pages) ,
- User manual (50 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
21.2 Bandwidth Control
This section is to define how much minimum bandwidth will be reserved to each user
group when a WAN connection is in full load. When this feature is enabled, a slider
with two indicators will be shown. You can move the indicators to adjust each group's
weighting. The lower part of the table shows the corresponding reserved download and
uploads bandwidth value of each connection.
By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20%
for Guest.
You can define a maximum download speed (over all WAN connections) and upload
speed (for each WAN connection) that each individual Staff and Guest member can
consume. No limit can be imposed on individual Managers. By default, download and
upload bandwidth limits are set to unlimited (set as 0).
http://www.peplink.com
-172 / 269 -
Copyright © 2016 Peplink
Advertisement
Table of Contents
