USER MANUAL
Peplink Balance Series
Service Name
This setting specifies the name of the outbound traffic rule.
This setting specifies whether the outbound traffic rule takes effect. When Enable is
checked, the rule takes effect: traffic is matched and actions are taken by the Peplink
Balance based on the other parameters of the rule. When Enable is unchecked, the rule
Enable
does not take effect: the Peplink Balance disregards the other parameters of the rule.
Click the drop-down menu next to the checkbox to apply a time schedule to this custom
rule.
This setting specifies the source IP address, IP network, or MAC address for traffic that
Source
matches the rule.
http://www.peplink.com
New Custom Rule Settings
-132 / 269 -
Copyright © 2016 Peplink