Client List; Wins Client; Ospf & Ripv2 - peplink ONE 20 User Manual
Balance multi-wan bonding routers
For more information, please visit peplink.com
Hide thumbs
Also See for ONE 20:
- User manual (258 pages) ,
- User manual (50 pages) ,
- User manual (207 pages)
Table of Contents
Advertisement
USER MANUAL
Peplink Balance Series
28.3 Client List
The client list table is located at Status>Client List. It lists DHCP and online client IP
addresses, names (retrieved from the DHCP reservation table or defined by users),
current download and upload rate, and MAC address.
Clients can be imported into the DHCP reservation table by clicking the
button on
the right. Further update the record after the import by going to Network>LAN.
If the PPTP server (see Section Error! Reference source not found.), SpeedFusion
TM
see Section 12.1), or AP controller (see Section 20) is enabled, you may see the
corresponding connection name listed in the Name field.
28.4 WINS Client
The WINS client list table is located at Status>WINS Client.
The WINS client table lists the IP addresses and names of WINS clients. This option will
only be available when you have enabled the WINS server (see Section 10). The
names of clients retrieved will be automatically matched into the Client List (see
previous section). Click Flush All to flush all WINS client records.
28.5 OSPF & RIPv2
Information on OSPF and RIPv2 routing setup can be found at Status>OSPF & RIPv2.
http://www.peplink.com
-236 / 269 -
Copyright © 2016 Peplink
Advertisement
Table of Contents
