USER MANUAL
Peplink Balance Series
Per-User Bandwidth Control
5.3
With per-user bandwidth control, you can define bandwidth control policies for up to 3
groups of users to prevent network congestion. Define groups by IP address and
subnet, and set bandwidth limits for every user in the group.
High Availability via VRRP
5.4
When your organization has a corporate requirement demanding the highest availability
with no single point of failure, you can deploy two Peplink routers in
mode. With High Availability mode, the second device will take over when needed.
http://www.peplink.com
-16 / 269 -
Copyright © 2016 Peplink
High Availability