the key description. Press the Soft Key with the desired page description and the GPS Chart
Plotter will change to that page.
3.7
CUSTOMIZING THE SOFT KEYS ON CP300/CP300i
The Soft Keys (CP300 and CP300i) can be individually customized from the default pages
(discussed above) to the following: CHART, DUAL CHART, CHART/COMPASS, CHART/
HIGHWAY, NAVIGATION, HIGHWAY, CELESTIAL, GPS STATUS, DSC LOG, DSC
DIRECTORY, NMEA DISPLAY, NMEA DATA, DEPTH TREND, WIND SPEED TREND,
TEMP TREND, SOG TREND, MARKS/WAYPOINTS, USER C-CARD, AIS LIST, FIND and
VIDEO INPUT. When the Optional FF525 (or FF520) 50/200kHz BLACK BOX FISH
FINDER is connected, any Soft Key can be customized to show FISH FINDER 50kHz, FISH
FINDER 200kHz, FISH FINDER 50/200kHz, FISH FINDER 50kHz/CHART, FISH FINDER
200kHz/CHART screens. Also when a SI-TEX RADAR Antenna is connected (USA only),
any Soft Key can be customized to show Radar pages, RADAR FULL, RADAR CHART,
RADAR OVERLAY and RADAR/FISH FINDER.
1. To change, momentarily press any of the Soft Keys, then press and hold the Soft Key
you want to customize.
2. A popup window will be shown with the above settings.
3. Move the ShuttlePoint knob up or down to select the desired page.
4. Press [ENT] or move the ShuttlePoint knob to the right to save the page to the selected
Soft Key.
Page 36
Figure 3.6 - Screen display pages on CP300/CP300i
Figure 3.7 - Window options of the selected Soft Key on CP300/CP300i
GPS Chart Plotters