Seagull Models P47 SNAFU Instruction Manual page 21

7) Apply 1-2 drops of thin C/A to each
of the mounting tabs. Allow the C/A to
cure without using accelerator.
C/A glue
8) A string has been provided in the wing
to pull the aileron lead through to the
wing root. Remove the string from the
wing at the servo location and use the
tape to attach it to the servo extension
lead. Pull the lead through the wing and
remove the string.
WWW.SEAGULLMODELS.COM
.
9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four
wood screws.
2x10mm
INSTALLING THE FLAP SERVO.
Repeat the procedure for the aileron
servo.
INSTALLING THE LIGHT COVER.
Please see below pictures.
21