Changing the Current Standard Settings
Standard Settings refers to a combination of Copy modes that the machine automatically applies at
power on or when
modes stored as the Standard Settings is explained.
NOTE
The Standard Setting is applied when:
-
(Stop) or
- the Auto Clear function works
- the operation in the Additional Functions menu is finished
The Standard Settings consists of the following seven settings:
- Standard Exposure
- Standard Zoom Ratio
- Standard Copy Quantity
- Frame Erase Width
- Auto Collate
- Sort Rotate
- Sharpness
Setting the Standard Exposure
You can set the standard copy exposure.
NOTE
The default setting is <MANUAL> and 5 (center).
1
Press
REGISTRATION/SETTING
1.COMMON SETTINGS
2
Press
REGISTRATION/SETTING
2.COPY SETTINGS
When you press
(Reset) is pressed. In this section, the procedure for changing the Copy
(Reset) is pressed (except for during copying)
(Additional Functions).
or
to select <2.COPY SETTINGS>, and press
, the <COPY SETTINGS> menu appears.
.
Changing the Current Standard Settings
3
3-3