Changing the Current Standard Settings
The Standard Settings refers to a combination of Copy modes that the machine
automatically sets after the power is turned ON or when [Reset] is pressed. In this
section, the procedure for changing the Copy modes stored as the Standard
Settings is explained.
NOTE
• The Standard Setting is applied when:
- [Stop] or [Reset] is pressed (except during copying)
- the Auto Clear function works
- the operation in the Additional Functions menu is finished
• The Standard Settings consist of the following seven settings:
- Standard Exposure
- Standard Zoom Ratio
- Standard Copy Quantity
- Frame Erase Width
- Auto Collate
- Sort Rotate
- Sharpness
Standard Exposure
You can change the setting of the standard copy exposure.
NOTE
The default setting is 'MANUAL' and exposure level 5 (center).
1
Additional Functions
Press [Additional Functions].
Changing the Current Standard Settings
3
3-3