Kit Contents - AeroWorks Carbon Cub SS ARF-QB Assembly Manual

100cc Carbon Cub SS ARF-QB
Materials List
Basic Aircraft Parts
Fuselage with pre-installed vertical fin - Covered
pre-drilled three holes for tail wheel
assembly:
(6) 4-40 blind nuts pre-installed for cowling
mounting
(8) 8-32 blind nuts pre-installed for landing
gear mounting
(4) 8-32 blind nuts pre-installed for stab
mounting
(2) Tunnel Hatches (front and rear) covered
and pre-installed with:
(8) T2x10mm PWA screws

KIT CONTENTS

5
(1) Top Hatch for engine box pre-installed
with:
(4) T2x10mm PWA screws
(2) Fuse Rear Side Window, tinted color,
pre-glued
(2) Fuse Front Side Window (can open),
tinted color, pre-installed with the below
items:
(4) Nylon Hinges (2 each side);
(8) M2x8mm bolts;
(8) M2 hex nuts and
(4) Nylon latch
(1) Door at the right of fuse, covered,
pre-installed
(1) Front Windshield- vacuumed and
painted, pre-installed with
(23) T2x8mm screws
(2) 3.5(o.d.)x100mm pull-pull exit tube
installed