Kit Contents - AeroWorks EXTRA 260 ARF-QB Assembly Manual

150cc EXTRA 260 ARF-QB
Basic Aircraft Parts:
Fuselage - vertical fin installed
box & firewall installed - fuel-proofed - pre drilled for
mounting of the tail wheel assembly.
(4) 8-32 blind nuts installed for main landing gear
(4) 4-40 blind nuts installed for the mounting of the
stab
(8) 4-40 blind nuts installed for the mounting of the
cowling
(2) 4-40 blind nuts installed for the mounting of
landing gear hatch cover
(4) 4-40 blind nuts installed for the mounting of the
bottom hatch cover of engine box
(1) Top hatch cover of engine box, pre installed by
(4) T2.6 x 10mm PWA wood screws
(1) Bottom hatch cover of engine box, pre installed
by (4) 4-40 x 10mm hex head style bolts
(1) Hatch cover for the landing gear –covered,
installed by (2) 4-40x16mm hex style bolts and
(2) 3mm flat washers
(1) Canopy base-painted, installed on the fuselage by
(4) 4-40 blind nuts and (4) 4-40x16mm hex style
bolts

KIT CONTENTS

– covered, engine
5
(1) Tinted Canopy—glued on the canopy base and
painted
(4) #6 bonded washers for the mounting of the
canopy base
(4) 3mm split lock washers for the mounting of the
canopy base
(2) 3.5(o.d.) x 1250mm Antenna guide tube installed
(2) 3.5(o.d.) x 80mm rudder pull-pull exit tubes
installed
Left Wing with Aileron – covered: Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mounting.
(2) Aluminum anti-rotation dowels - installed pre-
drilled hole for cotter pin installation
(11) pin point hinges (glued) Read to fly
(3) Aileron servo pull strings installed
Right Wing with Aileron – covered: Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mounting.
(2) Aluminum anti-rotation dowels - installed pre-
drilled hole for cotter pin installation
(11) pin point hinges installed (glued) Read to fly
(3) Aileron servo pull strings installed