Kit Contents - AeroWorks Extra 300 ARF-QB Assembly Manual

100cc Extra 300 ARF-QB
Basic Aircraft Parts:
Fuselage with pre-installed vertical fin , firewall fuel-
proofed, tail wheel assembly holes pre-drilled
(4) 8-32 blind nuts installed for main landing gear
(4) 4-40 blind nuts installed for the mounting of the
stab.
(2) 4-40 blind nuts installed for the mounting of
cowling.
(1) Top hatch cover of engine box with AW logo
installed by (4) T2.6x10mm PWA screws
(1) Landing Gear hatch cover installed by (2)
T2.6x16mm PWA screws
(2) Exit Slot Covers – covered and installed on the
bottom of the fuselage by (8) T2.6x10mm PWA
screws
(2) Aluminum L Barackets, 1 left and 1 right in-
stalled by M4x15mm bolts and M4 locks and
4mm flat washers
Canopy base—painted, with (4) 4-40 blind nuts
installed
(1) Tinted Canopy—glued on the canopy base and
painted,

KIT CONTENTS

(4) #6 bonded washers for the mounting of the can-
(4) 3mm split lock washers for the mounting of the
(1) 3.5(o.d.) x1250mm Antenna tube installed
(2) 3.5(o.d.) x120mm pull-pull exit tube installed
(1) Pre installed – Long Pipe mounting brackets
(1) Pre installed – Canister mounting bracket with
Left Wing with Aileron – covered: Pre-drilled for the
(2) 8-32 blind nuts installed for the wing mounting.
(2) located pins installed pre-drilled holes for cotter
(8) pin point hinges glued
(2) Aileron servo string installed
Right Wing with Aileron – covered: Pre-drilled for the
(2) 8-32 blind nuts installed for the wing mounting.
(2) located pins glued pre-drilled hole for cotter pin
(8) pin point hinges installed
(2) Aileron servo string installed
5
opy
canopy
with 60mm dia. holes
70mm dia. holes
mounting of the control horns
pins.
mounting of the control horns