Table of Contents
Advertisement
COWL INSTALLATION FOR CANISTER MUFFLERS
1. Gather the following items for the cowling in-
stallation.
Required Parts
◊
1 - 100cc Carbon Cub Cowling
Required Tools and Adhesives
◊
1 - 5/64" Ball Driver
2. Remove the (16) 4-40x 10mm bolts from the
cowling as shown below.
3. Slide the bottom half of the cowling onto the
fuse as shown. Ensure that the headers do not
come in contact with the cowl at this time.
4. Bolt the bottom half of the cowl to the fuse using
(4) 4-40-16mm bolts.
5. Place the top half of the cowling in place, using
the (16) 4-40x10mm bolts, fasten the top half of
the cowl to the lower half.
Note: A small drop of blue loctite will prevent the
cowling bolts from loosening due to vibration.
81
Hide quick links:
Advertisement
Table of Contents
