Installing The Second Paper Tray (Depending On Model Or Option) - Xerox WorkCentre 220 User Manual

Installation
I
NSTALLING THE SECOND PAPER TRAY
(
DEPENDING ON MODEL OR OPTION
1. Remove the second paper cassette
3. Remove the paper tray cover.
5. Put a stack of 500 paper sheets,
unit and tray 2 from their packag-
ing, including the protective tape
used to hold the various compo-
nents in place.
maximum, into the paper tray, making
sure to always position the paper so
that the up-side, when the paper is
packed, is always facing up.
2. Position the printer above the
additional paper tray unit. Align
the coupling pins of the additional
paper tray unit with the corre-
sponding notches in the bottom of
the printer.
4. Press the support plate located on the
paper tray until it locks into position.
6. Put the cover back onto the tray, and
insert the paper tray into the additional
paper unit.
2-15
)