Ozone Safety Information; For Consumables; Product Safety Certification - Xerox WorkCentre 220 User Manual

• Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the customer documenta-
tion.
• Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of paper
is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns.
Switch off the machine immediately, and contact your Xerox Customer Support Centre.

Ozone safety information

This product will produce ozone during normal operation. The ozone produced is heavier than air and
is dependent on copy volume. Adhering to the correct environmental conditions as specified in the
installation instructions will ensure that the concentration levels meet safe limits.
If you need additional information about ozone, please request the Fuji Xerox publication Ozone from
your Service Provider.

For consumables

Store all consumables in accordance with the instructions given on the package or container.
Keep all consumables away from the reach of children.
Never use a vacuum cleaner when you clean spilled toner. It can cause explosion as the toner fills
the vacuum cleaner and gets sparks. Use a broom or a wet cloth.
Never throw toner or a toner container into an open flame. It can cause an explosion and you can
get burnt.

Product safety certification

This product is certified according to IECEE "The IEC System for Conformity Testing and
Certification of Electrical Equipment" CB scheme using the Safety standards IEC60950-1 Edition1
(2001).
This product was manufactured under a registered ISO 9001 Quality system.
1-8
Before using the machine