Xerox WorkCentre 220 User Manual page 204

Cleaning the paper feed roller
1 - Turn off the printer and unplug the power cord.
2 - Remove the drum/toner cartridge set from the machine.
3 - Use a soft cloth to clean the paper feed roller.
4 - Put the drum/tone cartridge set back in place and refer to paragraph Replacing cartridges,
page 7-2.
5 - Close the printer cover, connect the power lead and power the machine using the switch
located on the front left hand side.
Caution -
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet
of paper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns.
Switch off the machine immediately, and contact your Xerox Customer Support Centre.
7-16
Maintenance