Waking The Et1 - Motorola ET1 Integrator Manual

Touch P3.
10.
Touch P1 or P2 to navigate to the ET1N0GxxFRxxxxxxx.zip file.
11.
Touch P3. The Factory Reset occurs and then the ET1 resets.
12.

Waking the ET1

The wake-up conditions define what actions wake up the ET1 after it has gone into suspend mode or has been
placed in Battery Swap mode. The ET1 can go into suspend mode by either pressing the Power button or
automatically by a time-out settings. These settings are configurable and the factory default settings are shown
in Table 1-2 are subject to change/update.
Wake-up Default Settings
Table 1-2
Condition for Wake-up
Press the Power button
Real-time Clock
Apply AC power
Press the Left or Right
Scan/Action button
G-sensor activity
Bluetooth activity
To set the user configurable wake conditions, touch
Wake Up Source Screen
Figure 1-8
Touch the checkbox to enable or disable the wake up condition.
User Configurable
No
No
No
Yes
Yes
Yes
Wake from Suspend
Yes
No
Yes
Yes
Yes
Yes
> Settings > Wake up source.
Getting Started 1 - 9
Wake from Battery
Swap Suspend
Yes
Yes
No
No
No
No