Chapter 10 Maintenance & Troubleshooting; Introduction; Maintaining The Et1; Battery Safety Guidelines - Motorola ET1 Integrator Manual

CHAPTER 10 MAINTENANCE &

Introduction

This chapter includes instructions on cleaning and storing the ET1, and provides troubleshooting solutions for
potential problems during ET1 and accessory operation.

Maintaining the ET1

For trouble-free service, observe the following tips when using the ET1:
•
Do not scratch the screen of the ET1. When working with the ET1, use finger or stylus intended for use
with capacitive touch screens. Never use an actual pen or pencil or other sharp object on the surface of
the ET1 screen.
•
The screen of the ET1 is glass. Do not to drop the ET1 or subject it to strong impact.
•
Protect the ET1 from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and
keep it away from heat sources.
•
Do not store or use the ET1 in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the ET1. If the surface of the ET1 screen becomes soiled, clean it with a
soft cloth moistened with a diluted window-cleaning solution.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.

Battery Safety Guidelines

•
The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
•
Follow battery usage, storage, and charging guidelines found in the
•
Improper battery use may result in a fire, explosion, or other hazard.
TROUBLESHOOTING
Chapter 1, Getting Started.