Mobility Services Platform; Uninstall An Application - Motorola ET1 Integrator Manual

9 - 6 ET1 Enterprise Tablet Integrator Guide
Setup the ET1 and either the USB/Charge Cable or the Single-slot USB Docking Cradle. See
1.
Accessories for setup information.
Place the ET1 into the cable cup or the cradle. USB Connected appears on the Status bar.
2.
Touch > Settings > Applications > Development.
3.
Select USB Debugging. A check appears in the checkbox. The Allow USB debugging? dialog box
4.
appears.
Touch OK.
5.
On the host computer, open a command prompt window and use the adb command:
6.
adb install <application>
where:
• <application> = the path and filename of the apk file.
Use the command adb help to get full list of adb commands.
NOTE
CAUTION
Unmount the microSD card on the host computer.
7.

Mobility Services Platform

The MSP 3 Client Software is a set of software components that come pre-installed on the ET1. The MSP 3
Client software consists of the following components:
The Rapid Deployment application provides support for MSP 3 Staging functionality, provides support for the
MSP 3 Legacy Staging process, and provides support for backward-compatible legacy MSP 2.x Legacy
Staging functionality.
The MSP Agent application provides MSP Provisioning functionality and Control functionality when used with
MSP 3.2 Control Edition.
Refer to the Mobility Services Platform 3.2 User's Guide, p/n 72E-100158-xx, for instructions for using the
Rapid Deployment and MSP3 Agent clients.

Uninstall an Application

To uninstall an application:
Touch > Manage apps.
1.
Touch the Downloaded tab.
2.
Carefully follow the host computer's instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.
Chapter 2,