Chapter 3 Usb Communication; Connecting To A Host Computer Via Usb - Motorola ET1 Integrator Manual

CHAPTER 3

Connecting to a Host Computer via USB

Connect the ET1 to a host computer using the USB/Charge Cable or Single-slot USB Docking Cradle to
transfer files between the ET1 and the host computer.
CAUTION
Setup the ET1 and either the USB/Charge Cable or the Single-slot USB Docking Cradle. See
1.
Accessories for setup information.
Place the ET1 into the cable cup or the cradle. USB Connected appears on the Status bar.
2.
Open the Notifications panel and touch USB connected. The USB Mass Storage screen displays.
3.
USB Mass Storage Screen
Figure 3-1
CAUTION
Touch Turn on USB storage. The Turn on USB Storage dialog box appears.
4.
USB COMMUNICATION
When connecting the ET1 to a host computer and mounting its microSD card, follow the host
computer's instructions for connecting and disconnecting USB devices, to avoid damaging or
corrupting files.
Ensure that all applications are not running. Loss of data may occur.
Chapter 2,