Add Packages - Motorola ET1 Integrator Manual

User Manager Window
Figure 7-2
In the Username text box, enter a user name. The text is case sensitive and required.
2.
In the Password text box, enter a password for the user. The text is case sensitive and required.
3.
In the Retype Password text box, re-enter the user password.
4.
Select the Admin checkbox to set the user to have administrator rights.
5.
Select the Enabled checkbox to enable the user.
6.
Click OK.
7.
Repeat steps 1 through 7 for each additional user.
8.

Add Packages

All system applications that are on the default image are available to all users.
NOTE
Create a list of installed applications (packages) on the ET1 that are available for use by all the users.
Click + next to Packages.
1.
To get a list of all the applications (packages) on the ET1 see
NOTE
the ET1 on page
Package Information Window
Figure 7-3
7-12.
Administrator Utilities
Determining Applications Installed on
7 - 3