2 - 16 ET1 Enterprise Tablet User Guide
Waking the ET1
The wake-up conditions define what actions wake up the ET1 after it has gone into suspend mode. The ET1
can go into suspend mode by either pressing the Power button or automatically by a time-out settings.
2-5
list the default wake up conditions.
Wake-up Default Settings
Table 2-5
Condition for Wake-up
AC power is applied.
ET1 is inserted into a cradle.
ET1 is removed from a cradle.
ET1 is connected to a USB device.
ET1 is disconnected from a USB device.
Scan/Action button is pressed.
The screen is touched.
Bluetooth communication
Waking Up the ET1
If the ET1 is not used for a while, the screen dims and then darkens to conserve the battery.
To wake the ET1, press the Power button.
The Lock screen displays. Slide
the Pattern screen appears instead of the Lock screen. See
Locked Screen
Figure 2-18
No
Yes
No
No
No
Yes
No
Yes
up to unlock the screen. If the Pattern screen unlock feature is enabled,
Un-Locking the Screen on page
Power Button
Automatic Time-out
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Table
2-13.