Removing Or Change The Screen Lock - Motorola ET1 Integrator Manual

Draw Pattern Screen
Figure 8-6
Draw a pattern connecting at least four dots.
3.
Touch Continue.
4.
Re-draw pattern.
5.
Touch Confirm.
6.
Touch Use visible pattern to show the pattern when user draws pattern.
7.
Touch Use tactile feedback to enable vibration when the user enters password.
8.
Touch Home. Next time the ET1 goes into suspend mode a Pattern is required upon waking.
9.
Pattern Screen
Figure 8-7

Removing or Change the Screen Lock

To change or remove the screen lock feature:
Touch > Settings > Location & security > Change screen lock.
1.
Enter the current PIN, Password or Pattern.
2.
Touch OK, if required.
3.
Touch None to remove the current screen lock or Pattern, PIN or Password to change the current lock to
4.
a different lock.
Settings 8 - 5