Four-Slot Battery Charger; Setup - Motorola ET1 Integrator Manual

Four-slot Battery Charger

The Four-slot Battery Charger charges up to four ET1 spare batteries.

Setup

Four-slot Spare Battery Charger
Figure 2-5
To charge spare batteries:
Setup the charger as shown above.
1.
Insert the spare battery into a spare battery charging well.
2.
A Charge LED is provided for each battery charging well. See
4620 mAh battery fully charges in approximately six hours.
AC Line Cord
Power Supply
DC Line Cord
Table 2-2 for charging status indications. The
Accessories 2 - 7