Screen Unlock Settings; Single User Mode - Motorola ET1 Integrator Manual

8 - 2 ET1 Enterprise Tablet Integrator Guide
data that they would ordinarily have to download from the GPS satellites and other aiding data that helps the
acquisition. With the A-GPS data, GPS receivers can operate faster and more reliably.
Check Use GPS satellites to use the ET1's global positioning system (GPS) receiver (stand-alone) to obtain
approximate location position. GPS accuracy is dependent upon a clear view of the sky and other factors.
To use Assisted GPS:
Touch Use Assisted GPS. The Assisted GPS Settings dialog appears.
1.
Touch the Enable Assisted GPS checkbox.
2.
Touch OK.
3.
The ET1N2 can use the Motorola Server or another location server. Touch SUPL settings. The SUPL
4.
setting dialog appears.
By default, Using Motorola Server is selected. To change to another server deselect the checkbox.
5.
In the Server FQDN/IP text box, enter the address of the location server.
6.
In the Port text box, enter the port number of the server.
7.
Touch OK.
8.

Screen Unlock Settings

Use the Location & Security settings to set preferences for locking the screen. Touch
Location & security.
NOTE Options vary depending upon the application's policy, for example, email.
•
Set up screen lock/Change screen lock - Touch to configure the ET1 to require a pattern, PIN, or
password to unlock the screen.
•
Screen unlock security - Touch to select the type of unlock security.
•
None - Disable screen unlock security.
•
Pattern - Draw a pattern to unlock screen. See
more information.
•
PIN - Enter a numeric PIN to unlock screen. See
more information.
•
Password - Enter a password to unlock screen. See
page 8-3
Lock the screen to protect access to data on the ET1. Some email accounts require locking the screen. The
Locking feature functions differently in Single-user versus Multiple-user mode.

Single User Mode

When locked, a pattern, PIN or password is required to unlock the ET1. Press the Power button to lock the
screen. The ET1 also locks after a pre-defined time-out.
Press and release the Power button to wake the ET1. The Lock screen displays.
Slide up to unlock the screen. If the Pattern screen unlock feature is enabled, the Pattern screen appears
instead of the Lock screen.
for more information.
Screen Unlock Using Pattern on page 8-4
Set Screen Unlock Using PIN on page 8-3
Set Screen Unlock Using Password on
> Settings >
for
for