Manual File Configuration; Groups File - Motorola ET1 Integrator Manual

AppLock Administrator Window
Figure 7-8
When the application launches the current status of the Application Lock feature displays (enabled or
disabled).
Log off and then log in again for the feature to take affect.
NOTE
If the user has administrator privileges the buttons are enabled.
2.
•
Touch Enable Application Lock to enable the Application Lock feature.
•
Touch Disable Application Lock to disable the Application Lock feature.
•
Touch Install Groups and White Lists to read the contents of the Groups and White List files from the
root of the microSD card and push its contents into the AppLock framework.
Once the Group and White List files are imported and the feature enabled, the next time a user logs in, the ET1
will be configured accordingly.

Manual File Configuration

Groups File

A Groups file is a text file that provides a list of groups and assigns users to each group.
The text file contains one line for each group. Each line is formatted as follows:
<groupname>:<user1>,<user2>,...<userN>
where:
<groupname>
field uses any alphanumeric character.
<user1>
as that defined for the MultiUser feature. See
information.
NOTE If the same user is assigned to multiple groups, then that user's White List will be a logical union of the
White Lists for all of the groups that user is assigned.
A line starting with the # character is considered a comment and is ignored.
Examples:
= the name for a group. This is also the name of the White List file for this group. This
through = the name of the user assigned to this group. The user name is the same
<userN>
Administrator Utilities 7 - 11
MultiUser Administrator on page 7-7 for more