Single-Slot Usb Docking Cradle; Setup; Charging The Et1 Battery - Motorola ET1 Integrator Manual

Single-slot USB Docking Cradle

The Single-slot USB Docking Cradle:
•
Provides 12 VDC power for operating and charging the ET1.
•
Synchronizes information between the ET1 and a host computer. See
for information on connecting the ET1 and a host computer.

Setup

Power Supply
Single-slot USB Docking Cradle Power and USB Connections
Figure 2-1

Charging the ET1 Battery

To charge the battery:
Setup the cradle as shown in
1.
Place the ET1 into the cradle.
2.
USB Cable
Figure 2-1.
Chapter 3, USB Communication
AC Line Cord
Power Port USB Port
Accessories 2 - 3