Change Password Dialog Box - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

System Options Dialog Box
Figure 6-48
Band Selection Options
Table 6-26
Field
Profile Roaming Select the
available WLAN profile when it moves out of range of the current WLAN profile.
Enable IP Mgmt Select
Address management. When checked, the Wireless Companion Service configures the IP based
on what is configured in the network profile. If unchecked, the Wireless Companion Service does
not configure the IP information. For this case, the user must configure the IP in the standard
Windows IP dialog screen. Enabled by default.
Auto Time Select
Config time is updated during network association, based on the time as set in the AP. This proprietary
feature is only supported with Symbol infrastructure. Enabled by default.

Change Password Dialog Box

Use the
Change Password
administrators to pre-configure profiles and not allow a user to change the network settings. The user could also
use this feature to protect their settings from a guest user. By default, the password is not set.
Change Password Window
Figure 6-49
To create a password for the first time, leave the
1.
and
New: Confirm:
To change an existing password, enter the current password in the
2.
in the and
New: Confirm:
Delete the password, in this case enter the current password in the
3.
text boxes empty.
Confirm:
NOTE Passwords are case sensitive and can not exceed 160 characters.
check box to configure the mobile computer to roam to the next
Profile Roaming
check box to enable the Wireless Companion Services to handle IP
Enable IP Mgmt
check box to enable automatic update of the system time. The device
Auto Time Config
dialog box to require a password before any profile can be edited. This allows system
text boxes. Tap .
Save
text boxes.Tap .
Save
Description
text box empty and enter the new password in the
Current:
Current:
Current:
Wireless Applications 6 - 39
text box, enter the new password
text box and leave the
New
: and