Table of Contents
Advertisement
INTRODUCTION
The PRIMUX CAT5 KVM System (PRIMUX) is designed to enable the relocation of a VGA monitor, PS/2 or USB keyboard, and
mouse from up to 64 PS/2, SUN, or USB CPUs by as much as 1000 feet.
Station and at least one Host Adapter (HA-PS2, HA-USB, or HA-SUN) connected to a CPU to be controlled by the user. The
PRIMUX-UZR User Station supports PS/2 and USB user keyboard and mouse (devices).
and use of both components.
The PRIMUX Host Adapter and User Station are interconnected with either CAT5 Unshielded Twisted Pair (UTP) or Shielded
Twisted Pair (STP) cable, CAT5e cable, or CAT6 cable.
The PRIMUX Series CAT5 KVM System is extremely simple to install and has been thoroughly tested to insure reliable
performance. Through the use of CAT5, CAT5e, or CAT6 cable it is possible to economically increase the flexibility of a computer
system.
Here are some of the features and ways this can benefit any workplace:
• Allows the placement of a monitor, keyboard, and mouse in a location where only these parts are needed without having
the CPU there too, taking up valuable space
• Allows any PS/2, USB, or SUN CPU to be accessed by a remote user (up to 1000 feet away)
• Additional RJ45 port on the Host Adapter allows the daisy-chaining of up to 64 Host Adapters providing user access to
up to 64 CPUs
• Control up to 64 CPUs from one keyboard, mouse, and monitor without "spaghetti" wiring
• Compatible with XGA, VGA, and SVGA systems
• Provides crisp and clear resolution up to 1024x768 /60Hz @ 1000 feet (using CAT5 UTP cable- see pg 35 for details)
• Video quality adjustment is automatic providing optimum image quality
• Allows for future expansion- buy what is needed now, add more later as desired
Supported Operating Systems
The PRIMUX is compatible with:
•
•
Win9x
WinMe
•
•
WinNT
WinXP
•
•
Win2K
Linux 7.x, 8.0
Materials
Materials Supplied with this kit:
•
NTI PRIMUX-UZR User Station
•
120VAC or 240VAC @ 50 or 60Hz -5VDC/2A AC Adapter
•
Line cord, country specific
•
Terminating Plug
•
PRIMUX CDROM w/ Owner's Manual and Quick Start Guide (pdf files)
•
Quick Start Guide (Printed)
Materials Not Supplied, but REQUIRED:
•
NTI HA-PS2 PS/2 Host Adapter / HA-USB USB Host Adapter / HA-SUN Host Adapter (see pg. 4)
•
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
35 for proper EIA/TIA 568B wiring method)
•
A null modem cable will be required for future software updates (see specification on page 36).
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or (330)-562-7070 or by
visiting our website at www.networktechinc.com.
•
Solaris
•
MAC OS9.x , OSX
•
Others
1
The PRIMUX is comprised of one PRIMUX-UZR User
This manual describes the installation
Advertisement
Table of Contents
