Table of Contents
Advertisement
To edit User parameters enter the desired parameter values as defined in the chart below:
Function
Modify the name (of the selected User)
Modify the password (of the selected
user)
Modify the Comment Field
Action on Logon - determines what
action to take when a user logs on to the
User Station
Logon Host- determines what Host
Adapter to connect to at logon
Assign Administrative Privileges to user
Define Hosts to Allow/Deny access to
Delete this user (Confirmation required)
Return to User List
Add New User
From the User List press <N> to add a new user. (From Command Mode type <A> - <E> - <U> - <N>.) The administrator will be
prompted for a "Y" or "N" answer to "Are you sure?" and with a "Y" answer the Edit User menu will come up where all of the
parameters for a new user can be defined. When finished, press <X> or <Esc> to exit the menu and the new user will have been
added to the User List.
By default, a new user will be given access to the same Host Adapters as those listed in the Host Adapter access list of User #1.
To change this, the administrator must edit the user host access list as described on page 27.
FYI: The first user in the user list is used as the "template" user.
parameters of the first user are copied to the new user. The administrator can either leave those parameters unchanged
and rapidly setup more users with the same access rights as the first user, or change the parameters as desired.
Keystroke
N
String, 16 characters max., case sensitive
P
String, 16 characters max., case sensitive
C
String, 32 characters max., case sensitive
O
0= bring up Command Mode menu
1= connect to CPU specified by Logon Host
L
Select host to be connected to automatically
A
H
Choose from the list, toggle selection(s)
D
X or Esc
Figure 29- Submenus of the Edit User menu
26
Parameter Value
when user logs on
Y or N
Press <Y> or <N> and <Enter>
using mouse or spacebar
Y or N
Press <Y> or <N> and <Enter>
N/a
Each time a new user is created, the configuration
Advertisement
Table of Contents
