Introduction - Network Technologies UNIMUX series Installation And Operation Manual

Unimux series high density vga usb kvm switch
Table of Contents

Advertisement

NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH

INTRODUCTION

The UNIMUX-USBV-xHDU High Density VGA USB KVM switch (UNIMUX) allows access to any Windows, MAC, or SUN USB
CPUs from one monitor, USB keyboard and USB mouse (up to 32 CPUs as a single switch or 512 CPUs when cascaded).
Internal microprocessor circuitry allows all USB CPUs to be booted simultaneously without keyboard error. Port selection is
accomplished by front panel push buttons or commands typed on the keyboard. Port lights and status LEDs continuously update
on the front panel. Video formats up to 2048X1536 at 150MHz bandwidth can be displayed from all platforms.
Types of User Input Devices Supported
Most USB Keyboards and Mice, corded and wireless
Types of CPUs Supported:
Any USB CPU supporting USB version 1.0 or above including:
USB Windows (all)
USB MAC
USB SUN
Linux
Other Devices Supported:
Touch screen monitors
Smart boards
CAC Card readers
Note: These devices are not supported when the UNIMUX is cascaded.
Option:
Extra USB device port for connection of USB cable from touch screen monitor or CAC card reader- add a "U" to the part number
(i.e. UNIMUX-USBV-xHDU)
:
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unimux-usbv-xhd

Table of Contents