The "RGB" scroll bar is used for fine video quality adjustment of all colors. This allows the user to "fine tune" the quality of the
adjusted video.
To verify if such an adjustment is actually needed, open an application with a white window (i.e. Microsoft Word) and move the
window to the right side of the screen to create a white-to-black transition.
the white window the adjustment may be needed. According to the color of the line, change the setting of the corresponding
horizontal scroll bar until the cleanest white-to-black transition is obtained.
Video Quality adjustment values are stored on a per Host Adapter basis.
FYI: For additional quality adjustment, it may be necessary to adjust the brightness and contrast settings of the monitor.
Administration
Administration Menu
Note: The Administration menu will only be accessible if the administrator is logged in or if the user has administration
rights.
Press <A> from the Command Mode menu to display the Administration menu.
The table below describes the functions of the Administration menu.
Function
Edit Host Adapter, Users, and User
Station
Update/Bootloader Menu
Change Idle Timeout
Alternate OSD Key
Acquire/Send DDC Info
Configure MAC Hosts
Select keyboard language
Esc
Figure 22- Administration Menu
Description
Edit the names and settings of the Host Adapter,
Users, and User Station
Update the firmware of the User Station and Host
Adapters
Set the time period for the Idle Timeout
Define the alternative key sequence (if any) to enter
Command Mode
Send DDC information about the monitor to all
connected and powered ON Host Adapters
Configure Host Adapters for use with MAC CPUs
Select the keyboard language for use with the CPU
Return to the Command Mode menu
21
If a colored vertical line can be seen at the edge of
Adjustment may be necessary for each Host Adapter.
Keystroke
X or Esc
E
B
I
K
D
M
L