Change Administrator's Password; Edit User Station; Figure 32- Administrator Password Screen; Figure 33- Edit User Station Screen - Network Technologies CAT5 Primux Installation And Operation Manual

Change Administrator's Password

To change the Administrator's Password, press <P> from the User List. (From Command Mode type <A> - <E> - <U> - <P>.)
A screen will appear prompting the administrator for a new password.
- Enter the current password (case sensitive, maximum
16 characters, alphanumeric)
- Press <Enter> or <Tab>
- Enter a new password,
- Press <Enter> or <Tab>
- To confirm, re-enter the password,
Press <Enter> to finish or <Tab> to enter the password
again.
Note: In the event the password is forgotten, contact NTI for instruction on how to reset the password to the default
"NTI".
FYI: When the password is changed for user ROOT , it automatically changes for user ADMINISTRATOR as well.

Edit User Station

From the Edit menu (pg 22) press <S> to bring up the Edit User Station menu. (From Command Mode press <A> - <E> - <S>.)

Figure 33- Edit User Station screen

28

Figure 32- Administrator Password screen