Table of Contents
Advertisement
To edit the User Station Info use the commands and enter the desired parameter values as defined in the chart below:
Function
Modify the name
Modify the Comment Field
Modify the Autologon to select the user to
be automatically logged in at power up
Reset User Station internal data
Default values will be restored.
Use with care, all user configuration
settings will be lost.
Delete all Host Adapters from the segment
Delete all users
Display the User Station info
Return to Edit Menu
Select Autologon User
From the Edit User Station menu, press <A> to bring up the Select User Menu. (From Command Mode type <A> - <E> - <S> -
<A>.)
To select which user will be automatically logged in when the User Station is powered up, choose one of the actions listed below:
Function
Description
Enter
Select the user indicated by the selection bar
Info
Display info on the selected user
None
Choose not to have any users logged on at power up. This will
bring up the Login screen at power up instead of a user menu.
Exit
Return to Edit User Station Menu
Confirmation
Keystroke
Required
N
No
C
No
A
No
R
Yes
H
Yes
U
Yes
I
No
X or Esc
No
Figure 34- Select user for Autologon
29
Parameter Value
String, 16 characters max., case
sensitive
String, 32 characters max., case
sensitive
None. Brings up Select User menu.
None
None
None
None
None
Keystroke
Enter
I
N
X or Esc
Advertisement
Table of Contents
