Host Adapters For Scan; Figure 19- Host Adapters For Scan List - Network Technologies CAT5 Primux Installation And Operation Manual

OSD Settings Menu
Function
Move OSD Window Down
Move OSD Window Up
Move OSD Window Right
Move OSD Window Left
Make OSD Window Taller
Make OSD Window Shorter
Reset OSD Window
Esc

Host Adapters for Scan

From the Settings Menu, press <S> for the list of Host Adapters to select for scanning. (From Command Mode press <T> - <S>)
Scan Mode enables the user to scan through selected ports and to have full device control of the connected port. From this menu
the user can edit the list of ports that can be scanned.
Only the selected ports will be scanned in Scan Mode when the respective user is logged in.
list (except for the "ROOT" user).
A check list with all the Host Adapter index numbers and names followed by a check-box will be displayed in the window.
• unchecked box = the corresponding Host Adapter is not in the scan list
• checked box
= the corresponding Host Adapter is in the scan list
The user can toggle the state of the selected check box by pressing <Spacebar>, <Enter> or clicking the Host Adapter with the
mouse.
Function Description
All Select all Host Adapters
None Clear all selected Host Adapters
Find Find a Host Adapter using name, comments, unique ID, or index number
Search Locate a Host Adapter by name
Description
Moves the OSD window down on the monitor
Moves the OSD window up on the monitor
Moves the OSD window to the right on the monitor
Moves the OSD window to the left on the monitor
Makes the OSD window taller on the monitor
Makes the OSD window shorter on the monitor
Resets the OSD to the default size and position
Exit the OSD Settings menu. Any changes are
automatically saved.

Figure 19- Host Adapters for Scan list

19
Keystroke
D or
U or
R or
L or
T
S
W
X or Esc
Each user can have their own scan
Keystroke
A
N
F
R