User Station Info Screen; Idle Timeout; Figure 35- User Station Info Screen; Figure 36- Idle Timeout Screen - Network Technologies CAT5 Primux Installation And Operation Manual

User Station Info screen

To display the user station information screen, press <I> from the Edit User Station screen (pg 28). (From Command Mode press
<A> - <E> - <S> - <I>.)
This screen displays the following information:
Item Description
Name The name of the User Station
Comment could be used to decribe the location
of the User Station
Unique ID a value unique to the segment
Master ID the segment 's Master ID
AutoLogon If set to a valid user number this user
will be automatically logged on at
power up
Type/ Product type and ROM version, used
Revision for identification puroposes
CodeCRC ROM CRC, use for identification
purposes
UstatID An internal serial number
Function
Return to the Edit User Station screen

Idle Timeout

Selects the idle time in minutes. xxx= time in minutes from 1 to 255. (From Command Mode press <A>-<I>.) Use 0 to disable
this feature. When the user is idle (no keyboard or mouse activity) for the selected number of minutes, the user will be logged out
and have to log back in. The user may either enter a value using the numeric keypad, increment/decrement the value using
arrows, or click on the arrows on the screen.
Function
Increment value by 1
Decrement value by 1
Increment value by 10
Decrement value by 10
Minimum value
Maximum value
Disable feature (assigns value 0)
Save new value
Esc
Keystroke
X or Esc
Functions for the available keystrokes are shown below.
Keystroke
Up arrow
Down Arrow
Page Up
Page Down
Home
End
D
S or Enter
X or Esc
30

Figure 35- User Station Info screen

Figure 36- Idle Timeout screen