Table of Contents
Advertisement
Edit User Password
The administrator can edit the user password by pressing <P> from the Edit User menu. . (From Command Mode type <A> - <E>
- <U> - <E> - <P>.) To setup the password:
-
Enter a password- 16 characters maximum,
alphabetical or numeric, (passwords are case
sensitive)
-
Press <Enter> or <Tab>
-
To confirm, re-enter the password
-
Press <Enter> to save and return to the Edit
User menu, or press <Tab> to enter the
password again
or
-
Press <Esc> to cancel and return to the Edit
User menu without making any changes
The default user password is none, meaning if no
password is assigned, a user will need only to submit
a valid user name and press <Enter> to login and
use the CPUs in the segment to which they have
access.
Host Access List
To define what CPUs a user has access to, press <H> from the Edit User List (pg 25). (From Command Mode press <A> - <E> -
<U> - <E> - <H>.) The "Allow/Deny Access to Hosts" list will be displayed.
Function
Description
NONE
Deselect all
ALL
Select all
INFO
Display info for selected Host
Adapter
FIND
Find Host Adapter (using name,
index number, comments, or ID)
SEARCH
Locate Host Adapter by name
GOTO
Locate Host Adapter by index
EXIT
Esc
All available Host Adapters will be listed 8 at a time. Use the arrow keys, mouse, Page Up/Down, Home, or End keys to move the
selection bar and see more Host Adapters if they are available.
-
press <Enter> or <Spacebar> to grant user access or not to the Host Adapter.
- a green checked box in the "A" (allow) column indicates access granted
- a yellow checked box in the "D" (deny) column indicates access denied
- if neither box "A" nor "D" is checked, access is denied
-
press <F1> to display the associated help file.
-
press <Esc> or <X> to exit and return to the User Access to Hosts list.
Figure 30- User Password screen
Keystroke
N
A
I
F
R
G
X or Esc
Figure 31- Allow/Deny Access to Hosts screen
With the selection bar over the desired Host Adapter;
27
Advertisement
Table of Contents
