TechniSat DIGIT ISIO STC Quick Start Manual page 58

Fault
PC cannot connect
to receiver;
receiver cannot connect
to network
DVR recording no longer
possible
Deletion of DVR recordings
not possible
DVR recordings
not displayed
A second encrypted
channel cannot be played.
Possible cause
Wrong network settings
Network cable connected
incorrectly
Selected
storage medium is full
File system on storage
medium is
corrupt
Selected storage medium is
not attached.
The two selected
channels are not located
on the same transponder
CI dual encryption
is not switched on
The CI / CI+ module being
Module is not "Dual-
Decrypt" compatible
58
Remedy
Check network settings (see
Point 8.5)
Check network connection
Delete existing
recordings
Attach and configure
another storage medium.
(see Point 11.4.1)
Check storage medium
(Point 11.4.2)
Connect configured storage
medium
(see Point 11.4.1)
Modify setting for storage
medium
(see Point 11.4.1)
Select two channels
that are located on the
same
transponder (see Points 9.4
and 9.4.10)
Switch on
CI dual encryption
(see Point 20.1)
Use "Dual-Decrypt"
compatible
module