Ending Playback - TechniSat DIGIT ISIO STC Quick Start Manual

Press the Pause / Play button again to resume playback from the same location.
>
14.3 Fast forward and rewind
Your DVR has fast forward and rewind functions so you can get to a specific place in a
recording.
During playback, press the Fast Forward or the Rewind button.
>
The display "Fast Forward
back at 4x speed in the selected direction.
Pressing the Fast Forward or Rewind button again increases the speed to 16x.
>
The display "Fast Forward
Pressing the Fast Forward or Rewind button once again increases the scan speed
>
to 16x.
The display " Fast Forward
By pressing the Fast Forward or Rewind yet again, you can jump forwards or
>
backwards in 10-minute intervals.
> When you get to the place you want in the recording, you can return to normal
playback mode by pressing the Pause / Play button.
14.4 Setting tags
> Skip as described above to a location in the recording where you want to add a tag.
Pressing the Record button sets a tag at the selected location.
>
14.5 Skipping between tags
During playback, you have the option of navigating directly to locations in the recording
where you have set tags.
Using the Tag menu item in the Options selection, select the tag to skip to the
>
location you want in the recording.

14.6 Ending playback

Press the Stop button to end playback.
>
Playback will end and your receiver will return to normal mode. In doing so the
receiver "takes note" of the place in the recording where playback ended. If you start
playing this recording again, it will automatically resume at the point where you
previously left off.
" or "Rewind " appears. The recording is played
" or "Rewind " appears.
" or "Rewind
48
" appears.